 鲜花( 6)  鸡蛋( 0)
|
本帖最后由 craigliu 于 2011-3-13 12:10 编辑
4 T( r5 }; f1 c
6 l0 q* |. f1 ^+ y; b"打算把这个硬盘拆下来连到另一台电脑上,可是怎么才能连上呢?".
( R+ |9 d1 |4 {1) Open case, you usually need to open two sides.
1 [; O/ J0 k& X2) unplug cables that attached to the HD. Usually there are two cables (one for power, one for data)., q* q' A- |) m; D* a. P
3) unscrew for HD.( X, Z* m5 {$ U0 S; |) w+ M: y0 |
4) take out HD.. k# d$ H6 V0 \% o) }4 _" y* E
5) Usually The HD is set as Master, and you need to reset jumper pin into Slave. There is a label on the HD that indicators how you set jumper pin.
$ M8 y" A; d$ J) W' L5 Y6) open the case of another computer.
8 P4 I& r/ Z3 x7) Connect all cables. (two cables. Only correct cable can be plugged. So just try, if you can plug in, it is right cable.), F. j. a6 ~5 x7 Q6 h/ F2 Q6 D
8) start computer.0 o5 l9 U% P5 |2 W/ i, }" P
& ~/ O) R8 N& M2 Z6 W2 B8 c
(I suppose you use the HD that was popular before, because you use XP.) |
|